亚洲欧美日韩精品一区,杭州性爱一区,中文字幕缅北一区不卡,日韩一本二本一区

PRODUCTS INDEX-PRODUCTS

ZGS series vertical high consistency water pulper

3立方高濃碎漿機(jī)3副本.jpg

ZGS series vertical high consistency hydraulic pulp pulping machine is designed according to the principle of water conservancy vortex. When the rotor rotates, the high consistency slurry circulates radially, which accelerates the hydration of wastewater. In the process of operation, waste paper is always in a high consistency state of fiber separation, has reached the purpose of recycling. In addition, the rotor blades are oblique helical bodies. No small chips will form, creating favorable conditions for slurry screening. The structure is novel, reasonable and high in pulp concentration. It has the characteristics of energy saving, water saving and small area. It is an ideal waste paper recycling equipment.

Two. Structure and working principle

ZGS Series Vertical High Concentration Hydraulic Pulper is mainly composed of groove, impeller, rotor, sieve plate, column and so on. The main crushing mechanism is impeller and rotor. When the impeller and rotor rotate, the high consistency pulp moves radially. At the same time, the two helical blades on the rotor rotate axially from the side of the groove, which makes the waste paper accelerate the dehydration in the groove. Because the waste pulp is in a high consistency state in the groove, it passes through the impeller and both ends. The helical blades move axially and radially, and the fibers are rubbed together to separate the ink particles from the fibers. As a result, the rotor and the spiral blade have a weak front tangent point and only peel off the light substances (such as plastic film) in the waste paper, no debris will be formed to facilitate the selection of pulp.

Three. Installation instructions

Before leaving the factory, the static balance of impeller, rotor, two spiral blades and great driving pulley was corrected, and running test was carried out. When installing, it is necessary to calibrate the four columns and make the main axis of the device perpendicular to the horizontal plane. At the top of the equipment, more than 1.5cm of space must be left, and the rotor has been disassembled. When the motor is connected to the test machine, the impeller rotates counterclockwise (overlooking). For the sake of safety, it is suggested that the user should first place the inlet of the groove above 80 cm of the operating table and, if it is below 80 cm, add a protective fence around the entrance of the groove. When the equipment works, because of the hydraulic shearing effect, the equipment will shake. It needs to be strengthened with reinforced concrete at 800 cm below the upper mouth of the hydraulic pulper.

Four. Process instructions

When the waste paper (deinking) is crushed in this machine, hot water and deinking agent are used, then the waste paper is put into the machine, and then the waste paper is put into the required concentration after starting operation. The water temperature is generally controlled between 60 and 95 C for the disposal of waste paper such as books, newspapers, pictorials and pictorials. The higher the temperature, the faster the waste paper is broken, and the more power is saved. According to the requirements of deinking process and the variety of waste paper, the appropriate amount of NaOH can also be added. The concentration of broken solution is generally 10-13%, and the water is diluted to 5 - 6% when the pulp is released. The body is equipped with a diluting tube. The water pressure of the tube is generally 1 - 3Kg/cm. The whole time of each tank (refers to the feeding through crushing to discharge) is generally 20-40 minutes depending on the variety of waste paper.

Five. Use and maintenance

It must be used when the equipment is in normal working condition. Iron, stone and wood blocks are strictly prohibited. The packing belt and other sundries are put into the pulp tank. It is not appropriate to put bundled books into the slot. To ensure good sealing, check and add packing packing frequently. Regular replacement of lubricating grease inside the king bearing.

日韩,欧美,国产,成人在线| 美女与男人午夜爽爽免费在线 | 三级国产精品黄色三级国产| 亚洲欧美非视频| 日韩五十路熟女| 亚洲色欲在线观看一区| 欧美日韩中文字幕一区二区| 久久久久最新三级片| 国产精品呦另类稀缺鲁鲁| 久久久久久久性色AV| 国产日韩欧美在线二区| 欧美精品后入少妇| 久久久久黄色精品| 免费自慰| 69久久久无码国产一区二区| 本道综合视频播放网站| 免费黄片视频| 婷婷五月综合区| 44看片【原麻豆 天美】| 99RE6在线视频精品| 亚洲国产高清一区| 香港久久久这里只有精品 | 久99久久| 中文有码高清在线| たちの熟人妻AV一区二区| 日本午夜在线看| 一本不卡久久综合88| 艹逼看片网站| 免费干b视频网站| 图区片一二区| 伊人久久亚洲综合网站| 深爱激情网婷婷| 大鸡扒插嫩逼| 亚洲激情影院| 日韩欧二区| 国产亚洲殴洲精品| 五月婷婷激情丁香在线| 精品XⅩX一区二区| 欧美中文激情在线| 欧美久久成人整片| 原千岁一区二区三区|